分分pk拾官网

六角护坡模具在使用脱模剂时应该注意哪些方面
发布人:管理员   发布时间:2019-8-23

六角护坡模具产品美观大方、简单明朗,各种规格尺寸的都可以随时加工订制并且可以大批量的生产,适合大范围生产应用,深受各大工程的喜爱,并且迅速在各行各开展起来。

Hexagonal slope protection die products are beautiful, generous, simple and clear, all specifications and sizes can be customized at any time and can be produced in large quantities, suitable for large-scale production and application, loved by major projects, and quickly developed in all walks of life.


六角护坡模具是我们平常常见的模具之一,为了使它好脱模有时候会使用脱模剂来提高模具的工作效率,永久模具厂给大家介绍一下我们平常使用脱模剂应该注意什么。

Hexagonal slope protection mould is one of our common moulds. In order to make it easy to demould, demoulding agent is sometimes used to improve the efficiency of moulds. Permanent mould factory will introduce to you what we should pay attention to when using demoulding agent.


首先在使用脱模剂之前,我们要对六角护坡模具做一个清理,让六角护坡模具保证表面的清洁。

First of all, before using release agent, we need to clean the hexagonal slope protection mold, so that the hexagonal slope protection mold can ensure the surface cleanliness.


然后在六角护坡模具表面涂抹脱模剂,待脱模剂干了之后,在进行一次涂刷,来回进行两三次便可以达到理想的效果;

Then the stripping agent is applied on the surface of the hexagonal slope protection die. After the stripping agent has dried up, the ideal effect can be achieved by brushing twice or three times.

                                     


使用清水把残留的增亮剂擦拭去,最后让六角护坡模具在通风较好的条件下进行吹风晾干,保持六角护坡模具的环境一直是干燥的。

Clean water is used to wipe off the residual brightener. Finally, the hexagonal slope protection mould is blown and dried under better ventilation conditions, so as to keep the environment of the hexagonal slope protection mould dry.


六角护坡模具的发展是随着产品质量的要求越来越高,对材料的选择也提出了更高的要求,欢迎您的咨询洽谈!


With the development of hexagonal slope protection die, the requirements of product quality are getting higher and higher, and the selection of materials is also put forward higher requirements. Welcome your consultation and discussion!

上一篇:没有了
分分pk拾官网 分分pk拾计划 三分pk拾 极速快三 分分pk10 三分pk拾 分分pk拾 彩乐乐网 极速快三计划 极速快三